Leading Manufacturer for Injector Ring - Rubber Y ring X ring v ring – GS Seal

Rubber Y ring X ring v ring

Material: NBR ,SILICON,FKM

Size: as usage requirement

1-V-type seal ring is an axial action of elastic rubber seal ring, used as a rotating shaft non-pressure seal.Sealing lip has good activity and adaptability, can compensate for greater tolerance and Angle deviation, can prevent internal grease or oil leakage, can also prevent the invasion of external splash water or dust.

2. O ring is mainly used for static sealing and reciprocating sealing.When used for rotary motion sealing, it is limited to low speed rotary sealing device.V-type sealing ring is generally installed in the outer circle or the inner circle on the rectangular section of the groove to play a sealing role.

3.Y type sealing ring is widely used in reciprocating sealing device.In addition, there is a spring tension (spring energy storage) sealing ring, is in the PTFE sealing material to join a spring, there are O spring, V spring, U spring.

3. Y X type sealing ring for hole

Product use: used for reciprocating movement of hydraulic cylinder piston seal.Scope of application: TPU: general hydraulic cylinder, general equipment hydraulic cylinder.CPU: hydraulic cylinder and high temperature and high pressure oil cylinder for construction machinery.Material: PU TPU, CPU, rubber

Product hardness: HS85±2°A Working temperature: TPU: -40 ~ +80℃CPU: -40 ~ +120℃ Working pressure: 32Mpa Working medium: hydraulic oil, emulsion.

4. Retaining ring for YX type hole

Product use: This standard is applicable to the cylinder working pressure is greater than 16Mpa with YX type sealing ring use, or cylinder eccentric force, play a role in protecting the sealing ring.Operating temperature :-40 ~ +100℃

Working medium: hydraulic oil, emulsion, aquatic product hardness: HS92±5A material: PTFE

5. Use Y ring and X ring for shaft

Application: Used for sealing piston rod in reciprocating motion hydraulic cylinder Applicable scope :TPU: general hydraulic cylinder, general equipment hydraulic cylinder.CPU: hydraulic cylinder and high temperature and high pressure oil cylinder for construction machinery.

Material: PU TPU, CPU, rubber hardness: HS85±2°A Working temperature: TPU: -40 ~ +80℃CPU: -40 ~ +120℃ Working pressure: 32MPa or less

Working medium: hydraulic oil, emulsion

7. Use y ring and x ring retaining ring for shaft

Product use: This standard is applicable to the cylinder working pressure is greater than 16Mpa with YX type sealing ring use, or cylinder eccentric force, play a role in protecting the sealing ring.Operating temperature :-40 ~ +100℃

Working medium: hydraulic oil, emulsion, aquatic product hardness: HS92±5A material: polytetrafluoroethylene according to: enterprise standards